Accelerator Pedal: Service and Repair
Power Adjustable Pedals Replacement1. Remove the lock pin (A) and joint pin (B).
2. Disconnect accelerator/brake pedal adjuster motor connector (C).
3. Disconnect the brake pedal position switch connector (D), and remove the clip (E).
4. Disconnect the accelerator pedal position (APP) sensor A/B 6P connector (F), and remove the clip (G).
5. Remove the power adjustable pedals bracket mounting bolt (H) and nuts (I).
6. Remove the adjustable pedals assembly.
7. Install the adjustable pedals assembly in the reverse order of removal.
8. Do the brake pedal and brake pedal position switch adjustment.