Front Door Window Glass Weatherstrip: Service and Repair

Front Door Glass Outer Molding Replacement

Special Tools Required
KTC trim tool set SOJATP2014 *
*Available through the American Honda Tool and Equipment Program

NOTE:
- Put on gloves to protect your hands.
- Take care not to scratch the door.
- Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.

1. Remove the power mirror.




2. Starting at the front, pull the door glass outer molding (A) to release the clips (B).




3. Release from the rear portion of the glass outer molding (A) from the glass run channel (B).
4. Install the glass outer molding in the reverse order of removal, and note these items:
- Check if the clips is damaged or stress-whitened, and if necessary, replace them with new ones.
- Make sure the rear portion of the glass outer weatherstrip connected to the glass run channel properly.