Output Shaft, (Countershaft) Speed Sensor Replacement
Output Shaft (Countershaft) Speed Sensor Replacement1. Do the battery removal procedure.
2. Remove the 6 x 1.0 mm bolt securing the resonator bracket under the battery base bracket, and remove the battery base and battery base bracket in the engine compartment.
3. Disconnect the output shaft (countershaft) speed sensor connector, and remove the output shaft (countershaft) speed sensor (A) and sensor washer (B).
4. Install the new O-ring (C) on the new output shaft (countershaft) speed sensor, then install the output shaft (countershaft) speed sensor and sensor washer.
5. Check the connector for rust, dirt, or oil, then connect the connector securely.
6. Install the battery base bracket and battery base, and secure the resonator bracket under the battery base bracket with the bolt.
7. Do the battery installation procedure.