Power Mirror Replacement

Power Mirror Replacement

1. Remove these items:
- Door panel
- Plastic cover, as needed

2. Raise the door glass fully.




3. Disconnect the connector (A).
4. Detach the harness clip (B).




5. Remove the maintenance cap (A), and remove the nuts. While holding the mirror, detach the clip (B), then remove the mirror (C). Take care not to scratch the door.
6. Install the mirror in the reverse order of removal, and note these items;
- Make sure the connector is plugged in properly.
- When reinstalling the door panel, make sure the plastic cover is installed properly and sealed around its outside perimeter to seal out water.