In-Bed Trunk Lid Key Cylinder Switch Test
In-Bed Trunk Lid Key Cylinder Switch TestRTS, RTL, and EXL models
1. Remove the in-bed trunk lid inner cover.
2. Disconnect the 2P connector from the key cylinder switch.
3. Check for continuity between the terminals. There should be continuity between the No. 1 and No. 2 terminals when the in-bed trunk lid key cylinder switch is in UNLOCK position. There should be no continuity between the No. 1 and No. 2 terminals when the in-bed trunk lid key cylinder switch is in the released (neutral) position.
4. If the continuity is not as specified, replace the in-bed trunk lid key cylinder switch.