Operation CHARM: Car repair manuals for everyone.
Home >> Honda >> 2008 >> Ridgeline V6-3.5L >> Repair and Diagnosis >> Restraints and Safety Systems >> Air Bag Systems >> Air Bag Control Module >> Service and Repair >> OPDS/ODS Unit Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

OPDS/ODS Unit Replacement

OPDS/ODS Unit Replacement

Removal

1. Disconnect the negative cable from the battery, then wait 3 minutes before starting work.
2. Disconnect the passenger's side airbag harness 2P connector.
3. Remove the passenger's seat assembly and seat-back cover.
4. Remove the cover (A), then disconnect the OPDS unit 8P/ODS unit 18P connector (B) and sensor connectors (C) from the OPDS/ODS unit (D).






5. Remove the two screws (E) and the OPDS/ODS unit.


Installation

1. Place the new OPDS/ODS unit (A) on the seat-back frame. Tighten the two screws (B), and connect the OPDS unit 8P/ODS unit 18P connector (C) and sensor connectors (D) to the OPDS/ODS unit. Reinstall the cover (E).






2. Install the seat-back cover in the reverse order of removal.
3. Install the seat assembly, then connect the side airbag harness 2P connector.
4. Reconnect the negative cable to the battery.
5. Set the seat-back in the normal position, and make sure there is nothing on the front passenger's seat.
6. Initialize the OPDS/ODS unit.
7. After installing the OPDS/ODS unit, confirm proper system operation: Turn the ignition switch ON (II); the SRS indicator should come on for about 6 seconds and then go off.
pro multis · About Operation CHARM