Fluid - M/T: Service and Repair

Transmission Fluid Inspection and Replacement
1. Raise the vehicle on a lift.
2. Remove the filler plug (A) and the sealing washer (B), check the condition of the fluid, and make sure it is at the proper level (C).





3. If the fluid is dirty, remove the drain plug (A) and drain the fluid.





4. Install the drain plug with a new sealing washer (B), and refill the transmission fluid to the proper level.

Fluid Capacity:
1.48 L (1.56 US qt) at fluid change
1.62 L (1.71 US qt) at overhaul

Always use Honda manual transmission fluid (MTF). Using engine oil can cause stiff shifting because it does not contain the proper additives.

5. Install the filler plug (C) with a new sealing washer (D).