Ambient Light Test/Replacement (With Moonroof)

Ambient Light Test/Replacement

With moonroof

NOTE: The ambient light is built into the moonroof switch.

1. Remove the front individual map lights. Front Individual Map Light Test/Replacement

2. Disconnect the 10P connector (A) from the moonroof switch.

3. Connect the battery power to terminal No. 5*1 (No. 3)*2 and ground to terminal No. 3*1 (No. 2)*2. The ambient light should turn on. If the light does not turn on, replace the moonroof switch as an assembly.

*1: '07 model

*2: '08-09 models

4. Install the switch and light in the reverse order of removal.