Power Mirror Replacement (2-Door)

Power Mirror Replacement

2-door

1. Lower the door glass fully.

2. Carefully pull out the mirror mount cover (A) to release the clip, then lift the cover to release the hook (B). Remove the cover.






3. Disconnect the connector (A), and remove the cap (B).

4. While holding the mirror, remove the nuts securing the mirror.






5. While holding the mirror, squeeze the sides of the connector clip (A), then push out to remove the mirror (B). Take care not to scratch the door.

6. Install the mirror in the reverse order of removal, and make sure the connector is plugged in properly.