Front Door Weatherstrip: Service and Repair

Front Door Weatherstrip Replacement

NOTE:

- Put on gloves to protect your hands.

- Take care not to scratch the door.

- Use a clip remover to remove the clips.

1. At the A-pillar, remove the door checker mounting bolt (A).

2. Detach the clips (B, C, D, E), then remove the door weatherstrip (F).

3. Install the weatherstrip in the reverse order of removal, and note these items:
- If the clips are damaged or stress-whitened, replace them with new ones.

- Make sure the weatherstrip is installed in the holder (G) securely.

- Apply medium strength liquid thread lock to door checker mounting bolt before installation.

- When reinstalling the door panel, make sure the plastic cover is installed properly and sealed around its outside perimeter to seal out water.

- Check for water leaks. Adjustments

2-door





4-door