Operation CHARM: Car repair manuals for everyone.
Home >> Honda >> 2009 >> Civic L4-1.8L >> Repair and Diagnosis >> Restraints and Safety Systems >> Air Bag Systems >> Safing Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Safing Sensor: Service and Repair




Rear Safing Sensor Replacement

Removal

1. Do the battery terminal disconnection procedure, Procedures then wait at least 3 minutes before starting work.

2. Remove the rear seat. Rear Seat Removal/Installation

3. Disconnect the floor wire harness 4P connector (A) from the rear safing sensor.

4. Using a TORX T30 bit, remove the TORX bolt (B), then remove the rear safing sensor (C).






Installation

1. Install the rear safing sensor (A) with a new TORX bolt (B) then connect the floor wire harness 4P connector (C) to the rear safing sensor.

2. Do the battery terminal reconnection procedure. Procedures

3. Reinstall all removed parts.

4. Clear any DTCs. Initial Inspection and Diagnostic Overview

5. Confirm proper operation: Turn the ignition switch to ON (II); the SRS indicator should come on for about 6 seconds and then go off.





pro multis · About Operation CHARM