Trunk / Liftgate Position Sensor: Testing and Inspection

Hatch Latch Switch Test

1. Open the hatch and remove the hatch trim panel. Interior Trim Removal/Installation - Hatch Area

2. Disconnect the 2P connector (A) from the hatch latch switch (B).

3. Check for continuity between the hatch latch switch 2P connector terminals No. 1 and No. 2.
- There should be continuity with the hatch open.

- There should be no continuity with the hatch closed.

4. If the continuity is not as specified, replace the switch. Hatch Latch Replacement