M/T Transfer Drive Gear Bearing Replacement (4WD, M/T)

M/T Transfer Drive Gear Bearing Replacement

Special Tools Required

- Bearing driver attachment, 37 x 40 mm 07746-0010200
- Bearing driver attachment, 42 x 47 mm 07746-0010300
- Driver handle, 15 x 135L 07749-0010000
NOTE: Coat all parts with MTF during reassembly.

1. Remove the 76.2 mm tapered roller bearing (A) from the transfer drive gear (B) using a commercially available bearing separator (C), the 37 x 40 mm bearing driver attachment (D), the 15 x 135L driver handle (E), and a press.






2. Install a new 76.2 mm tapered roller bearing (A) on the transfer drive gear (B) using the 42 x 47 mm bearing driver attachment (D), the 15 x 135L driver handle (E), and a press.