M/T Transfer Output Shaft Bearing Removal/Installation (4WD, M/T)

M/T Transfer Output Shaft Bearing Removal/Installation

Special Tools Required

- Inner driver handle, 40 mm 07746-0030100
- Inner bearing driver attachment, 35 mm 07746-0030400
NOTE: Coat all parts with MTF during reassembly.

1. Remove the 62 mm tapered roller bearing (A) from the transfer output shaft (B) using a commercially available bearing separator (C), an adapter (D), and a press.






2. Install a new 62 mm tapered roller bearing (A) on the transfer output shaft (B) using the 40 mm inner driver handle (C), the 35 mm inner bearing driver attachment (D), and a press.