Harmonic Balancer - Crankshaft Pulley

Crankshaft Pulley Torque

Tighten the crankshaft pulley bolt. Do not use an impact wrench.

Hold the pulley with the handle (A) and crankshaft pulley holder (B), then tighten the bolt to 37 N-m (3.8 kgf-m, 27 lbf-ft) with a torque wrench and a 19 mm socket (C). If the pulley bolt or crankshaft are new, tighten the bolt to 177 N-m (18.0 kgf-m, 130 lbf-ft), then remove the bolt and tighten it to 37 N-m (3.8 kgf-m, 27 lbf-ft).

Mark the embossed mark (D) on the bolt flange and the crankshaft pulley (E) as shown, then tighten the bolt an additional 90 ° (The mark on the bolt head should line up with the next embossed mark (F) on the bolt flange).