Front Door Window Glass Weatherstrip: Service and Repair

Front Door Glass Outer Weatherstrip Replacement

Special Tools Required

- KTC Trim Tool Set SOJATP2014
*

NOTE:

- Once you remove the door glass outer weatherstrip, replace it with a new one because it will bend during removal.
- Put on gloves to protect your hands.
- Take care not to scratch the door.
- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

1. Remove these items:

- Door panel Service and Repair
- Power mirror:
- Without driving position memory system Power Mirror Replacement (Without DPMS)
- With driving position memory system Power Mirror Replacement (With DPMS)

2. Remove the screws from the edges of the door.






3. Starting at the rear, pull up the door glass outer weatherstrip (A) at each area where the inner molding (B) catches the inside edge of the window slot, then remove the weatherstrip.





4. Install the weatherstrip in the reverse order of removal, and push it into place securely.