Vanity Mirror Light Test/Replacement

Vanity Mirror Light Test/Replacement

1. Carefully pry off the lens (A) with a small screwdriver.









2. Remove the two screws, then remove the vanity mirror light (B).

3. Disconnect the two terminals (C) from the vanity mirror light.

4. Check for continuity between the terminals.

- There should continuity between the terminals with the vanity mirror cover opened.
- There should be no continuity between the terminals, with the vanity mirror cover closed.

5. If the continuity is not as specified, check the bulb or the light. If the bulb or light is OK, replace the sunvisor.

6. Install in the reverse order of removal.