Operation CHARM: Car repair manuals for everyone.
Home >> Honda >> 2009 >> Odyssey V6-3.5L >> Repair and Diagnosis >> Restraints and Safety Systems >> Air Bag Systems >> Seat Occupant Sensor >> Service and Repair >> Front Passenger's Weight Sensor Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Front Passenger's Weight Sensor Replacement




Front Passenger's Weight Sensor Replacement

'08-10 models

Removal

1. Do the battery terminal disconnection procedure Procedures, then wait at least 3 minutes before starting work.

2. Remove the front passenger's seat assembly Front Seat Removal/Installation.

3. Remove the tamper-resistant TORX bolts (A) and bolts (B) attaching the seat track (C) and seat riser (D) to the front passenger's weight sensors (E).





4. Disconnect the weight sensor connectors (F) from the front passenger's seat wire harness (G), then remove the front passenger's weight sensors.

Installation

NOTE:

- Be sure to install the harness wires so they are not pinched or interfering with other parts.
- Make sure both of the hooks (A) on the seat track are properly secured to the front bracket (B). If the hooks are not properly secured, the front passenger's weight sensors will not function properly.

1. Install the front passenger's weight sensors (C) with tamper-resistant TORX bolts (D) on the seat riser (E).





2. Connect the weight sensor connectors (F) to the front passenger's seat wire harness (G), then install the track (H) on the front passenger's weight sensors with bolts (I).

3. Reinstall the front passenger's seat Front Seat Removal/Installation.

4. Do the battery terminal reconnection procedure Procedures.

5. Clear any DTCs Reading and Clearing Diagnostic Trouble Codes.

6. Do the front passenger's weight sensor initialization. Programming and Relearning

7. Confirm proper operation: Turn the ignition switch to ON (II); the SRS indicator should come for about 6 seconds and then go off.

pro multis · About Operation CHARM