Washer Fluid Level Switch Test

Washer Fluid Level Switch Test

Canada models

1. Remove the right inner fender:

- '07 model
- '08-10 models Front Inner Fender Replacement

2. Disconnect the 2P connector (A) from the washer fluid level switch.





3. Remove the washer fluid level switch from the washer reservoir.

NOTE: Fluid may flow out of the opening.

4. Check for continuity between terminals No. 1 and No. 2 in each float position.

- There should be continuity when the float is down.
- There should be no continuity when the float is up.

5. If the continuity is not as specified, replace the switch.