Third Row Seat-Back Recline Cable Replacement

Third Row Seat-Back Recline Cable Replacement

Special Tools Required

- KTC Trim Tool Set SOJATP2014
*Available through the Honda Tool and Equipment Program, 888-424-6857

NOTE:

- Take care not to kink the cable.
- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

1. Remove the third row seat-back recline lever Third Row Seat-Back Recline Lever Replacement.

2. Remove these items:

- Third row seat-back cover
- Third row seat recline outer cover Service and Repair

3. Release all of the hooks (A) from behind the seat-back (B).






4. Detach the clip (A), then disconnect the seat-back recline cable (B).






5. Release the recline cables (A) from back of the seat-back frame holder (B).






6. Install the third row seat-back recline cable in the reverse order of removal, and note these items:

- Make sure the cable is connected securely.
- Make sure the seat unlatches properly and latches securely.