Navigation Display Buttons Do Not Work Or Respond Properly (10 Model)

Navigation System Symptom Troubleshooting - Navigation display buttons do not work or respond properly

Navigation display buttons do not work or respond properly

Diagnostic Test: Unit Check

NOTE:

- Check the vehicle battery condition first Testing and Inspection.
- Check the connectors for poor connections or loose terminals.
- Make sure that the correct navigation DVD color and version are installed.
- Check any official Honda service website for more service information about the navigation system.
- Before troubleshooting, make sure you have the anti-theft codes for the audio system and the navigation system.
- After troubleshooting, enter the anti-theft codes for the audio system and the navigation system.
- Always verify the concern and compare the system operation to a known-good vehicle with the same software loaded whenever possible. If the concern is duplicated in the known-good vehicle, then it can be considered a characteristic of the system.

1. Turn the ignition switch to ON (II).

2. Go into the Detail Information & Settings, select Unit Check, and use Hard Key test under Unit Check Navigation System Diagnostic Mode.

Does the audio-navigation unit buttons work properly?

YES -

The system is OK at this time.�

NO -

Replace the audio-navigation unit Audio-Navigation Unit Removal/Installation.�