Operation CHARM: Car repair manuals for everyone.
Home >> Honda >> 2010 >> CR-V 2WD L4-2.4L >> Repair and Diagnosis >> Accessories and Optional Equipment >> Navigation System >> Testing and Inspection >> Symptom Related Diagnostic Procedures >> Navigation Frequently Asks For Anti-Theft Code And/Or Needs GPS Initialization (10 Model)
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Navigation Frequently Asks For Anti-Theft Code And/Or Needs GPS Initialization (10 Model)




Navigation System Symptom Troubleshooting - Navigation frequently asks for anti-theft code and/or needs GPS initialization ('10 model)

Navigation frequently asks for anti-theft code and/or needs GPS initialization

NOTE:

- Check the vehicle battery condition first Testing and Inspection.
- Check the connectors for poor connections or loose terminals.
- This is often caused by a loss of battery power, a low or poor battery condition, or a poor ground.
- Make sure that the correct navigation DVD color and version are installed.
- Check any official Honda service website for more service information about the navigation system.

1. Check the No. 23 (10 A) and the No. 17 (15 A) fuses in the under-hood fuse/relay box and the No. 34 (7.5 A) fuse in the under-dash fuse/relay box.

Are the fuses OK?

YES -

Go to step 2.

NO -

Replace the fuses.�

2. Turn the ignition switch to ON (II).

3. Measure the voltage between audio-navigation unit connector A (24P) terminal No. 24 and body ground, and between terminal No. 14 and body ground, and between audio-navigation unit connector C (8P) terminal No. 1 and body ground.









Is there battery voltage in either terminal?

YES -

Go to step 4.

NO -

Repair an open in the wire(s) between the appropriate fuse/relay box and the audio-navigation unit.�

4. Measure the voltage between audio-navigation unit connector A (24P) terminal No. 12 and body ground, and between audio-navigation unit connector C (8P) terminal No. 4 and body ground.









Is there less than 0.2 V in either terminal?

YES -

Replace the audio-navigation unit Audio-Navigation Unit Removal/Installation.�

NO -

Repair an open or high resistance in the wire between the audio-navigation unit and body ground (G504) or audio-navigation unit connector C (8P) and body ground (G502).�

pro multis · About Operation CHARM