Operation CHARM: Car repair manuals for everyone.
Home >> Honda >> 2010 >> CR-V 2WD L4-2.4L >> Repair and Diagnosis >> Instrument Panel, Gauges and Warning Indicators >> Compass >> Testing and Inspection >> Programming and Relearning
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Programming and Relearning




Electrical Compass Calibration

NOTE: You should do this procedure in an open area away from buildings, power lines, and other vehicles.

1. Check the No. 10 (7.5 A) fuse in the under-dash fuse/relay box.

2. Enter gauge self-diagnostic function mode Initial Inspection and Diagnostic Overview.

3. Press and hold the SEL/RESET button for about 3 seconds to enter self-diagnostic customize mode.

4. Press and hold the SEL/RESET button until the display changes to Calibration mode (about 1 second). Then, Calibration will start blinking, and the direction display will change to "--".

5. Drive the vehicle slowly in 2 complete circles.

6. Press and hold the SEL/RESET button until the display changes to Reset mode (about 10 seconds).

7. Compare the zone setting displayed to the map. If the zone is incorrect, turn the dashlight brightness controller to the left or right to select the proper zone.





8. Press the SEL/RESET button to complete the calibration and return to the normal mode.

NOTE: Step 1-6 are to calibrate the electrical compass. Step 7-8 are to set the zone.

pro multis · About Operation CHARM