Operation CHARM: Car repair manuals for everyone.
Home >> Honda >> 2010 >> CR-V 4WD L4-2.4L >> Repair and Diagnosis >> Transmission and Drivetrain >> Transfer Case >> Service and Repair >> Removal and Replacement >> Transfer Assembly Removal
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Transfer Assembly Removal




Transfer Assembly Removal

1. Shift the transmission into N.

2. Raise the vehicle on a lift, and make sure it is supported securely.

3. Remove the drain plug (A), and drain the automatic transmission fluid (ATF).





4. Reinstall the drain plug with a new sealing washer (B).

5. Disconnect the A/F sensor connector (K24Z1 engine) and the secondary HO2S connector.






6. K24Z1 engine: Remove the A/F sensor harness and the secondary HO2S harness from the harness clamps.

K24Z6 engine: Remove the secondary HO2S harness from the harness clamp.






7. Remove the three-way catalytic converter (K24Z1 engine) or the under-floor three-way catalytic converter (K24Z6 engine).






8. Make a reference mark (A) across the propeller shaft (B) and the transfer companion flange (C).





9. Separate the propeller shaft from the transfer companion flange.

10. Remove the transfer assembly mounting bolts (A) (4), and pull out the bolt (B) to the limit of travel.





11. Remove the transfer assembly (C) and the dowel pin (D) from the transmission.

pro multis · About Operation CHARM