Front Splash Shield Replacement (4-Door)

Front Splash Shield Replacement

4-door

NOTE:

- Put on gloves to protect your hands.

- Take care not to scratch the body.

- When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.

1. Remove the splash shield (A).
-1 Detach the clips (B) that secure the front inner fender (C) and the front splash shield to the body.
From under the front bumper (D), detach the clips (E, F).
-3 From under the body, detach the clips (G).
Release the hooks (H) of the front splash shield, then pull the splash shield out.
-4 NOTE: Release the clips by prying up on the center pin at the notch (I).

2. Install the splash shield in the reverse order of removal, and note these items:
- If the clips are damaged or stress-whitened, replace them with new ones.

- Push the clips and the hooks into place securely.