Tightening Torque and Sequence

Cylinder Head Bolt

Front






Rear






Torque the cylinder head bolts in sequence to 30 Nm (3.1 kg-m, 22 lb-ft)

After torquing, tighten all cylinder head bolts in two steps (90 ° per step)

If you are using a new cylinder head bolt
Tighten the bolt an extra 90 °.

Cylinder Head Bolt Re-usability

Measure the diameter of each cylinder head bolt at point A and point B.
If either diameter is less than 11.3 mm (0.445 in), replace the cylinder head bolt.






Camshaft Bearing Cap

FRONT










Rear










Intake Manifold Specifications

Camshaft Gear/Sprocket Specifications