Operation CHARM: Car repair manuals for everyone.
Home >> Honda >> 2010 >> Element 4WD L4-2.4L >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Service and Repair >> Overhaul >> Regulator Valve Body Disassembly, Inspection, And Reassembly
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Regulator Valve Body Disassembly, Inspection, And Reassembly




Regulator Valve Body Disassembly, Inspection, and Reassembly

1. Clean all parts thoroughly in solvent, and dry them with compressed air. Blow out all passages.

2. Inspect the valve body for scoring and damage.

3. Check all valves for free movement. If any fail to slide freely, do the valve body repair procedure Valve Body Repair.

4. Hold the regulator spring cap in place while removing the stop bolt. The regulator spring cap is spring loaded.

5. Coat all parts with ATF during assembly.

6. When reassembling the valve body, align the hole in the regulator spring cap with the hole in the valve body, then press the spring cap into the valve body, and tighten the stop bolt.






SPRING SPECIFICATIONS





pro multis · About Operation CHARM