Water Pump Replacement
Water Pump Replacement
1. Remove the drive belt Service and Repair.
2. Drain the engine coolant Service and Repair.
3. Remove the tensioner pulley Drive Belt Auto-Tensioner Pulley Replacement.
4. Remove the water pump pulley (A).
5. Remove the six bolts securing the water pump (B), then remove the water pump.
6. Inspect and clean the O-ring groove and the mating surface of the water passage.
7. Install the water pump with a new O-ring (C) and the water pump pulley.
8. Clean up any spilled engine coolant.
9. Install the tensioner pulley Drive Belt Auto-Tensioner Pulley Replacement.
10. Install the drive belt Service and Repair.
11. Refill the radiator with engine coolant, and bleed the air from the cooling system Service and Repair.