Operation CHARM: Car repair manuals for everyone.
Home >> Honda >> 2012 >> CR-V 2WD L4-2.4L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Engine Lubrication >> Oil Pressure Sender >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Oil Pressure Sender: Service and Repair






Engine Oil Pressure Switch Removal and Installation

Removal

1. Oil Pressure Switch





1. Remove the oil pressure switch (A).

2. Remove any old liquid gasket from the switch mounting hole.

Installation

1. Oil Pressure Switch





1. Apply liquid gasket (P/N 08718-0004 or 08718-0009) to the oil pressure switch threads. Install the component within 5 minutes of applying the liquid gasket.

NOTE:
* Using too much liquid gasket may cause liquid gasket to enter the oil passage or the end of the oil pressure switch.
* If too much time has passed after applying the liquid gasket, remove the old liquid gasket and residue, then reapply new liquid gasket.

2. Install the oil pressure switch (A).
pro multis · About Operation CHARM