Operation CHARM: Car repair manuals for everyone.
Home >> Honda >> 2012 >> CR-V 2WD L4-2.4L >> Repair and Diagnosis >> Heating and Air Conditioning >> Cabin Temperature Sensor / Switch >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Cabin Temperature Sensor / Switch: Service and Repair






Humidity/In-Car Temperature Sensor Removal and Installation

Removal

1. Center Maintenance Cover





1. Remove the maintenance cover (A).

2. Shift Lever Panel (AT)





1. Carefully pry out the shift lever panel (A) with the appropriate trim tool to detach the clips (B, C) and the hooks (D), then remove the shift lever panel.

3. TPMS Control Unit - Move





1. Press the tab (A), and remove the TPMS control unit (B) with connector connected.

4. Humidity/In-Car Temperature Sensor





1. Push out the humidity/in-car temperature sensor (A) by press the tab (B) from back.

2. Disconnect the aspirator hose (C) and the connector (D).

Installation

1. Humidity/In-Car Temperature Sensor





1. Connect the aspirator hose (A) and the connector (B).

2. Install the humidity/in-car temperature sensor (C).

2. TPMS Control Unit - Move





1. Install the TPMS control unit (A) with connector connected.

3. Shift Lever Panel (AT)





1. Install the shift lever panel (A). Make sure the clips (B, C) and the hooks (D) snap into place securely.

4. Center Maintenance Cover





1. Install the maintenance cover (A).
pro multis · About Operation CHARM