Operation CHARM: Car repair manuals for everyone.
Home >> Honda >> 2012 >> CR-V 4WD L4-2.4L >> Repair and Diagnosis >> Power and Ground Distribution >> Auxiliary Power Outlet >> Service and Repair >> Accessory Power Socket Trim Removal and Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Accessory Power Socket Trim Removal and Installation






Accessory Power Socket Trim Removal and Installation

Removal

1. Front Console Cover - Both Sides

Left side





Right side





1. Remove the clips (A).

2. Detach the clips (B), then remove the front console covers (C).

2. Center Console Rear Trim





1. Carefully pry out the center console rear trim (A) with the appropriate trim tool to detach the clips (B) and the hooks (C), then remove the center console rear trim.

3. Center Console





1. Carefully pry out the center lower cover (A) with the appropriate trim tool to detach the clips (B), then remove the center lower cover.

2. Remove the bolt (C).





3. Remove the bolts (A).





4. Remove the console box mat (A), then remove the bolts (B).





5. Disconnect the connectors (A), and remove the clips (B).





6. Slide both front seats fully rearward, and recline the seat-backs around two thirds to the rear.

7. Remove the center console (A).

4. Auxiliary Jack Assembly





1. Carefully pull out the auxiliary jack assembly (A).

5. Accessory Power Socket Trim





1. Disconnect the connectors (A), then remove the screws (B).





2. Remove the accessory power socket trim (A).

Installation

1. Accessory Power Socket Trim





1. Install the accessory power socket trim (A).





2. Install the screws (A), then connect the connectors (B).

2. Auxiliary Jack Assembly





1. Install the auxiliary jack assembly (A).

3. Center Console





1. Install the center console (A).





2. Connect the connectors (A), and install the clips (B).





3. Install the bolts (A), then install the console box mat (B).





4. Install the bolts (A).





5. Install the bolt (A), then install the center lower cover (B). Make sure the clips (C) snap into place securely.

4. Center Console Rear Trim





1. Install the center console rear trim (A). Make sure the clips (B) and the hooks (C) snap into place securely.

5. Front Console Cover - Both Sides

Left side





Right side





1. Install the front console covers (A). Make sure the clips (B, C) snap into place securely.
pro multis · About Operation CHARM