Operation CHARM: Car repair manuals for everyone.
Home >> Honda >> 2012 >> CR-V 4WD L4-2.4L >> Repair and Diagnosis >> Starting and Charging >> Battery >> Service and Repair >> Removal and Replacement >> Battery Sensor Removal And Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Battery Sensor Removal And Installation






Battery Sensor Removal and Installation

Removal

1. Battery Sensor





1. Make sure the ignition switch is in LOCK (0).

2. Disconnect the connector from the battery sensor (A).

3. Remove the battery sensor from the battery.

4. Remove the cover (B).

5. Remove the negative terminal (C).

NOTE: Do not hold the battery sensor connector (D), for protecting from damage when removing the negative terminal.

Installation

1. Battery Sensor





1. Install the negative terminal (A) on the battery sensor (B).

NOTE:
* Make sure between the negative terminal and battery sensor are clean.
* Do not hold the battery sensor connector (D), for protecting from damage when installing the negative terminal.

2. Install the cover (C).

3. Install the battery sensor to the battery.

4. Connect the connector to the battery sensor.

5. Apply multipurpose grease to the terminal to prevent corrosion.
pro multis · About Operation CHARM