Operation CHARM: Car repair manuals for everyone.
Home >> Honda >> 2012 >> CR-Z L4-1.5L Hybrid >> Repair and Diagnosis >> Body and Frame >> Frame >> Subframe >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Subframe: Service and Repair




Subframe Replacement

Front Subframe Torque

NOTE:

- After loosing the subframe mounting bolts, be sure to replace them with new ones.
- After reinstalling the subframe, check and adjust the front wheel alignment Service and Repair.





Front Subframe Alignment

NOTE: Align the front subframe using a screwdriver or tapered punch as a guide.

1. Align the front subframe (A) in the following sequence.

1. Lift the front subframe up to the body, and loosely install the new subframe mounting bolts (B).

2. Loosely install the new subframe mounting bolts (C).

3. Insert a screwdriver (D) through the right side positioning hole (E) on the subframe, and into the positioning hole (F) on the body, then loosely tighten the right subframe mounting bolt.

4. Insert a screwdriver through the left side positioning hole on the subframe, and into the positioning hole on the body, then loosely tighten the left subframe mounting bolt.

5. Tighten the subframe mounting bolts to the specified torque values stating with the right subframe mounting bolt. Use the screwdriver when tightening the right subframe mounting bolts.

6. Check all of the subframe mounting bolts, and retightening if necessary.

NOTE: Tighten the bolts in the sequence as shown.





2. After reinstalling all removed parts, check and adjust the front wheel alignment.

pro multis · About Operation CHARM