Climate Control Unit Knob Replacement

Climate Control Unit Knob Replacement

NOTE:

- Do not work in a dusty or dirty place.
- Do not work with dusty hands.
- Discharge static electricity from your body before and during the work.
- Do not touch the circuit board(s) with your bare hands.

1. Remove the climate control unit Climate Control Unit Removal/Installation.

2. Remove the dial (A).






3. Remove the self-tapping screws, then remove the cover (A) from the climate control unit.






4. Remove the circuit board (B).

5. Remove the self-tapping screws and the circuit board (A).






6. Remove the self-tapping screws and the knob (A).






7. Remove the trim (A) and the panel (B).






8. Remove the knobs (A) using the flat-tip screwdriver wrapped in protective tape.

NOTE Take care not to scratch the climate control unit.






9. Install the knob in the reverse order of removal. After installation, operate the various functions to see whether it works properly.

10. Run the self-diagnostic function to confirm that there are no problems in the system.