Operation CHARM: Car repair manuals for everyone.
Home >> Honda >> 2012 >> CR-Z L4-1.5L Hybrid >> Repair and Diagnosis >> Steering and Suspension >> Steering >> Relays and Modules - Steering >> Steering Control Module >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Steering Control Module: Service and Repair




EPS Control Unit Removal/Installation

1. Do the 12 volt battery terminal disconnection procedure.

2. Remove the driver's kick panel Service and Repair.

3. Disconnect EPS control unit connector A (11P) and connector B (16P) by pushing the lock (C) and pulling down the lever (D) from the EPS control unit.





4. Remove the EPS control unit.

5. Install the EPS control unit (C).





6. Pull up the lever (D) of the EPS control unit connector A (11P) and connector B (16P), then confirm the connector is fully seated to the EPS control unit.

7. Install the driver's kick panel Service and Repair.

8. Do the 12 volt battery terminal reconnection procedure.

9. After installation, start the engine, allow it to idle, and turn the steering wheel from lock to lock several times. Check that the EPS indicator does not come on.

pro multis · About Operation CHARM