Passenger's Power Window Motor Test

Passenger's Power Window Motor Test

1. Remove the passenger's power window switch Passenger's Power Window Switch Replacement.

2. Test the motor in each direction by connecting battery power and ground to the passenger's power window switch 8P connector according to the table.










3. If the motor does not run or fails to run smoothly, go to step 4.

4. Remove the passenger's door panel Door Panel Removal / Installation.

5. Disconnect the 2P connector (A) from the passenger's power window motor (B).






6. Check for continuity between the passenger's power window switch 8P connector terminals and the passenger's power window motor 2P connector terminals as shown.










7. If the wire harness is OK, replace the passenger's power window motor Service and Repair.