Mirrors: Testing and Inspection

Power Mirror Actuator Test

Removal

1. Front Door Power Window Switch Panel (4-door)





1. Remove the power window switch panel (A).

2. Front Door Panel - Driver's Side (4-Door)





1. Remove the inner handle cap (A).





2. Remove the screw (A).





3. Remove the screw (A).





4. Remove the door panel (A).

Test

1. Power Mirror Actuator - Test (4-Door)









1. Disconnect the connector.

2. Check actuator operation by connecting power and ground according to the table.

3. If the mirror fails to work properly, the power mirror actuator is faulty; replace the power mirror.

Defogger Test

4. Check for continuity between power mirror connector terminals No. 1 and No. 3. There should be continuity. If the resistance is not as specified, check for an open or high resistance in the wire between the connector and mirror holder. If the wire is OK, replace the mirror holder.

Installation

1. Front Door Panel - Driver's Side (4-Door)





1. Install the door panel (A).





2. Install the screw (A).





3. Install the screw (A).





4. Install the inner handle cap (A).

2. Front Door Power Window Switch Panel (4-door)





1. Install the power window switch panel (A).