Operation CHARM: Car repair manuals for everyone.
Home >> Honda >> 2012 >> Civic L4-1.8L >> Repair and Diagnosis >> Body and Frame >> Exterior Moulding / Trim >> License Plate Frame >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

License Plate Frame: Service and Repair






Rear License Trim Removal and Installation

Removal

1. Trunk Lid Trim Panel





1. For some models: Remove the trunk lid trim panel (A).

2. Rear License Trim





1. Remove the bolt (A).





2. Pull out the rear license trim (A) to release the clip pins (B) from the clip grommets (C) on the trunk lid.

NOTE: The clip grommets will stay on the trunk lid.





3. Remove the clip grommets (A) from the trunk lid.

4. Install the clip grommets into the clip pins on the rear license trim.

NOTE: If the clip pins and the clip grommets are damaged or stress-whitened, replace them as an assembly with new ones.

Installation

1. Rear License Trim





1. Hold up the rear license trim (A), and fit the clips into the holes in the trunk lid.

2. Push on the trim until the clips snap into place securely.





3. Install the bolt (A).

2. Trunk Lid Trim Panel





1. For some models: Install the trunk lid trim panel (A).
pro multis · About Operation CHARM