Front Fog Light Removal and Installation

Front Fog Light Removal and Installation

Removal

1. Front Fog Light Assembly





1. Remove the front fog light assembly (A) from the front bumper.

2. Disconnect the connector.

2. Front Bumper Fog Light Cover

2-door





4-door





1. Remove the front bumper fog light cover (A).

3. Front Fog Light





1. Remove the front fog light (A) from the bracket (B).

Installation

1. Front Fog Light





1. Install the front fog light (A) to the bracket (B).

2. Front Bumper Fog Light Cover

2-door





4-door





1. Install the front bumper fog light cover (A).

3. Front Fog Light Assembly





1. Connect the connector.

2. Install the front fog light assembly (A) to the front bumper.

4. Front Fog Light - Adjustment









Before adjusting the front fog light:
* Park the vehicle on a level surface.
* Make sure the tire pressures are correct.
* The driver or someone who weights the same should sit in the driver's seat.
* Unload the vehicle.

NOTE: The fog lights should aim down slightly. To check for proper adjustment.

1. Park the vehicle in front of a wall or a screen (A).

2. Turn the front fog lights on.

3. Determine if the front fog lights are aimed properly:

* Measure the height of the front fog lights (B).
* On the screen or wall, mark the height of the front fog lights with a piece of tape mark (C).
* With the vehicle parked 3 m (9.8 ft) from the screen, the top of the front fog light beam should be 4.5 cm (1.77 in) (D) below the tape mark.





4. Adjust the front fog lights by turning the adjuster (A).