M/T Differential Rotating Torque Check

M/T Differential Rotating Torque Check

Check

1. Vehicle Lift

1. Raise the vehicle on a lift, and make sure it is securely supported.

2. M/T Differential Rotating Torque Check









1. Turn the ignition switch to LOCK (0).

2. Shift the transmission into neutral.

3. Measure the rotating torque with a beam-type torque wrench in the direction shown. Rotate the torque wrench more than two complete turns, and take the maximum reading.

4. Shift the transmission into low gear, and measure the rotating torque again.

5. Calculate the rotating torque.

6. Repeat steps 2 through 5 for the other wheel.

7. Replace the limited slip differential assembly if the rotating torque is lower than the service limit.