Driver/Vehicle Information Display: Service and Repair

Multi-information Switch Test/Replacement

1. Remove the driver's airbag assembly. Driver's Airbag Replacement

2. Remove the three screws (A), then remove the steering wheel trim (B), and disconnect connectors (C) from each switches.





3. Remove the cover (D).

4. Remove the switch mounting screws, then remove the multi-information switch (E) from the steering wheel trim.

5. Measure the resistance between terminals No. 1 and No. 5 in each position according to the table.





6. If the switch is OK, but there is a problem with the switch function, check the cable reel subharness and cable reel.