Audio Display-USB Adapter Control Unit Removal/Installation

Audio Display-USB Adapter Control Unit Removal/Installation

SRS components are located in this area. Review the SRS component locations Locations, and the precautions and procedures Service Precautions before doing repairs or service.

NOTE:

- Put on gloves to protect your hands.
- Take care not to scratch the dashboard.

1. Remove the center panel Dashboard Center Panel Removal/Installation.

2. Remove the screws from the audio display-USB adapter control unit (A).






3. Disconnect the connectors (A), and remove the audio display-USB adapter control unit (B).





4. Install the audio display-USB adapter control unit in the reverse order of removal.