Front Bulkhead Cover Replacement

Front Bulkhead Cover Replacement

NOTE:

- Take care not to scratch the front bumper or the body.
- When prying with a flap-tip screwdriver, wrap it with protective tape to prevent damage.

1. Remove the air intake scoop.

2. Detach the clips, then remove the front bulkhead cover (A).

NOTE: To release the clips, pry up on the center pin at the notch (B).





3. Install the cover in the reverse order of removal, and note these items:

- If the clips are damaged or stress-whitened, replace them with new ones.
- Push the clips into place securely.