Door Lock Knob Switch Test

Door Lock Knob Switch Test

Driver's Door

1. Remove the driver's door panel Service and Repair.

2. Disconnect the 10P connector (A) from the actuator (B).






3. Check for continuity between the terminals in each switch position according to the table.






4. If the continuity is not as specified, the door lock knob switch is faulty; replace the driver's door latch Service and Repair.

Front Passenger's Door

1. Remove the front passenger's door panel Service and Repair.

2. Disconnect the 10P connector (A) from the actuator (B).






3. Check for continuity between the terminals in each switch position according to the table.






4. If the continuity is not as specified, the door lock knob switch is faulty; replace the front passenger's door latch Service and Repair.

Sliding Door

1. Remove the left or right sliding door panel Service and Repair.

2. Disconnect sliding door latch remote control assembly connector B (3P) (A) from the actuator (B).





The illustration shows the left side.

3. Check for continuity between the terminals in each switch position according to the table.









4. If the continuity is not as specified, the sliding door lock knob switch is faulty; replace the sliding door latch remote control assembly Service and Repair.