Cargo Area Light Test/Replacement

Cargo Area Light Test/Replacement

1. Turn the cargo area light switch OFF.

2. Carefully pry the lens (A) off with a flat-tip screwdriver.










3. Remove the two screws, then remove the cargo area light (B).

4. Disconnect the 3P connector (C) from the cargo area light.

5. Check for continuity between the terminals in each switch position according to the table.






6. If the continuity is not as specified, check the bulb (D). If the bulb is OK, replace the cargo area light.

7. Install the light in the reverse order of removal.