Interior Light Switch Test/Replacement

Interior Light Switch Test/Replacement

NOTE: The interior light switch allows you to select when the front individual map lights come on.
You can select the ON, OFF, or DOOR position.

1. Remove the front individual map lights.

2. Disconnect the interior light switch 12P connector (A) and the front individual map light 3P connector (B).





3. Remove the interior light switch (C) from the map light housing.

4. Check for continuity between the terminals in each switch position according to the table.






5. If the continuity is not as specified, replace the interior light switch assembly.

6. Install the parts in the reverse order of removal.