Line Pressure Switch Replacement (6-Speed A/T)

Line Pressure Switch Replacement

1. Remove the air intake scoop.

2. Do the battery removal procedure.

3. Remove the air cleaner Service and Repair.

4. Remove the intake air duct.

5. Remove the main under-hood fuse box.

6. Remove the battery base.

7. Disconnect the line pressure switch connector, and remove the line pressure switch (A) and the sealing washer (B).





8. Install the line pressure switch with a new sealing washer, and tighten the switch.

9. Check the connector for corrosion, dirt, or oil, and clean or repair if necessary, then connect the connector securely.

10. Install the battery base.

11. Install the main under-hood fuse box.

12. Install the intake air duct.

13. Install the air cleaner Service and Repair.

14. Do the battery installation procedure.

15. Install the air intake scoop.