Washer Motor Test

Washer Motor Test

1. Remove the right front inner fender Front Inner Fender Replacement.

2. Disconnect the 2P connector (A) from the windshield/rear window washer motor (B).





3. Test the motor by connecting battery power to terminal No. 1(or No. 2)*and ground to terminal No. 2 (or No. 1)* of the washer motor. The motor should run.

*: Rear window washer motor operation.

- If the motor does not run or fails to run smoothly, replace it. Service and Repair
- If the motor runs smoothly, but little or no washer fluid is pumped, check for a disconnected or blocked washer hose, or a clogged washer motor outlet.