Trunk / Liftgate Handle: Service and Repair

Tailgate Handle Replacement

NOTE:

- Put on gloves to protect your hands.
- Take care not to scratch the tailgate.

1. Remove the tailgate lower trim panel .

2. Disconnect the tailgate outer handle switch connector (A), then remove the nuts securing the tailgate handle.






3. Pull out the tailgate handle (A) to detach the clips, then remove the tailgate handle from the tailgate.





4. Remove the grommets (B) from the tailgate, then insert the grommets into the clips on the tailgate handle.

5. Install the tailgate handle in the reverse order of removal, and note these items:

- If the clips are damaged or stress-whitened, replace them with new ones.
- Make sure the tailgate handle switch connector is plugged in properly.
- Push the clips into place securely.