Splash Shield Replacement

Splash Shield Replacement

NOTE:

- Put on gloves to protect your hands.
- Take care not to scratch the body.
- When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.

1. Remove the bolts, and the clips (A, B, C), then remove the splash shield (D).

NOTE: To release the clips B, pry up on the center pin at the notch (E).





2. Install the splash shield in the reverse order of removal, and note these items:

- If the clips are damaged or stress-whitened, replace them with new ones.
- Push the clips into place securely.